ktm lc4
- Frank
- Team SidecarCross.com
- Posts: 742
- Joined: Thu Feb 12, 2004 2:35 pm
- Location: Schoenbronn, Germany
- Contact:
Re: ktm lc4
Take a look on http://www.team-brustmann.dejuan wrote:hello , I'm looking for pictures of sidecross with ktm lc4 engine for make one similar , thanks-
Refuse To Lose
.
Frank Hofmann
.
Frank Hofmann
- Willard Notten
- Active Visitor 100
- Posts: 197
- Joined: Mon Feb 09, 2004 12:43 pm
- Location: Harfsen Netherlands
- Mike Burns Jr
- Posts: 39
- Joined: Wed Feb 18, 2004 9:43 pm
- Location: Sunny SoCal
KTM LC4 in EML delta chassis
Has anyone installed a KTM LC4 in a EML Delta chassis? Will it fit?
What are the best year LC4 motors, and how reliable are they?
Thanks for your help.
Mike Burns
What are the best year LC4 motors, and how reliable are they?
Thanks for your help.
Mike Burns
EMLMTH1
- dominique ribbers
- Posts: 42
- Joined: Tue Apr 27, 2004 10:06 pm
- Location: ruurlo
- Contact:
Re: KTM LC4 in EML delta chassis
hello mikeMike Burns Jr wrote:Has anyone installed a KTM LC4 in a EML Delta chassis? Will it fit?
What are the best year LC4 motors, and how reliable are they?
Thanks for your help.
Mike Burns
whe built a ktm lc4 engine in a Eml kit chasiss , the best lc4 engine is a ktm lc4 620 sc (old type), they are very fast.
and take a dellorto 40mm carburator
take al look on http://www.enduro-portal.de for the engines
kind regards Dominique Ribbers
[/img]
sidecarcross team Ribbers
-
- Posts: 25
- Joined: Fri Aug 26, 2005 10:40 pm
I fitted a 620lc4 into a '99 delta chassis. move the engine/swingarm mount up 3/4", use an inlet pipe from a 2.5T linde fork lift truck pointing up into the tank, cut the bottom out the tank, put the air filter in the tank, use a remote tank in the chair, move the rad into the chair.
lot of work and head sratching...
good luck
lot of work and head sratching...
good luck
- dominique ribbers
- Posts: 42
- Joined: Tue Apr 27, 2004 10:06 pm
- Location: ruurlo
- Contact:
thank you for the information , we build new ktm plastic (2006) on the eml deltabox, and the 620 engine,s are very good,bignige620 wrote:I fitted a 620lc4 into a '99 delta chassis. move the engine/swingarm mount up 3/4", use an inlet pipe from a 2.5T linde fork lift truck pointing up into the tank, cut the bottom out the tank, put the air filter in the tank, use a remote tank in the chair, move the rad into the chair.
lot of work and head sratching...
good luck
good luck
sidecarcross team Ribbers